the monitoring mode.
4. Attach the Fever Monitor to your child’s diaper or
pajamas making sure the sensor probe is against her
bare skin and that your baby is wearing clothing that
covers the stomach as well as the monitor to avoid the
loss of body heat. It will take approximately 3 minutes
for the reading to stabilize.
5. To reset the monitor after the alarm goes off, press the
Power button once and the beeping will stop. This will
not interrupt the monitoring feature. Therefore, if your
baby’s fever goes up another degree, the monitor will
beep again.
6. To turn off, press the Power button for 2 seconds.
NOTE:
To prolong battery life, please turn off your Fever
Monitor when not in use. Store in a cool dry place.
INSTRUCTIONS FOR USE AS AN ORAL THERMOMETER
1. Pull the monitor probe up and away from the monitor
and wipe it clean with alcohol and then with water.
2. Press the Power button and listen for 1 beep which
indicates it is ready to start taking a temperature
reading.
3. Place the monitor probe under your child’s tongue
toward the back. The temperature reading will be
complete in approximately 1 minute.
FEVER INFORMATION
What is a “normal” temperature?
Temperature varies with each individual. A normal temper-
ature refers to each individual’s average temperature while
they are well. Normal average temperatures range from
96.6–99.5° F (35.9–37.5°C) when taken orally. Oral
temperature readings are more accurate than skin surface
LCD display
Power Button
Back clip
Probe
Battery cover
Remove protective film before first use
Front View
Back View
Fever Monitor Manual 7/26/05 10:02 AM Page 4
