BEBE CONFORT Morion i-Size, Инструкция по эксплуатации

Страница: 21 / 26

Bébé Confort
I
Morion i-Size
I
23
*We recommend you to always use your Bébé Confort
Morion i-Size with the ISOFIX connectors when your
vehicle is equipped with it.
SAFETY
General instructions Bébé Confort Morion i-Size
1. The car seat is for car use only.
2. The car seat is developed for an intensive use of
approximately 10 years.
3. We advise to check the expanded polystyrene (EPS)
parts regularly for damages.
WARNING:
Check that the child seat is properly installed. It is
important for your child’s safety that you fit the belt
correctly. The vehicle belt must be fixed along the
appropriated markings/ positioning points on the seat.
Please also read the label on the side of the car seat.
Never fit the belt in any way other than as shown. If in
any doubt about the correct installation or use of the
system, the user is advised to contact the distributor
or the manufacturer of the child restraining device
system.
Bébé Confort Morion i-Size in the car
1. After purchasing, install the seat in your vehicle. If
you encounter any installation problems, contact your
distributor immediately (prior to use).
2. Use the car seat only on a front-facing seat that is
fitted with an automatic or static 3-point belt that has
been approved according to the ECE R16 standard or
similar. Do NOT use a 2-point belt.
3. Remove the car seat headrest if it stops you from
adjusting the headrest of the car seat to the desired
height.
4. Make sure to replace the headrest of the back seat of
your vehicle when you remove the car seat.
5. The car seat back support cannot be removed to
ensure optimum safety.
WARNING:
• The Bébé Confort Morion i-Size must only be installed
in the car in a forward-facing position.
Your child in the Bébé Confort Morion i-Size
1. Make sure the headrest is adjusted to the proper
height.
2. Tell your child not to play with the seat belt buckle
and to keep its head against the headrest.
Maintenance instructions
The EPS parts of the headrest and backrest may not
be removed.
A - Headrest
B - Cover
C - Shoulder belt guides
D - Lap belt guides
E - Headrest adjustment button
F - ISOFIX connectors*
G - ISOFIX connectors release button
H - Storage compartment for the manuals
EN