13
12
Assembly / Operating Instructions
To remove car seat from stroller frame
1.
Simultaneously swing the car seat’s handle up while pressing
both grey levers on the car seat side handle moulds to release
the car seat.
2.
Lift up car seat via the handle.
Folding stroller
NOTE: Both plastic adaptors can remain attached to the stroller frame when folding stroller.
Fold the stroller as per stroller manufacturer’s folding instructions.
To remove adaptor
To release the set of plastic adaptor from stroller, slide the red buttons
on the side of the plastic adaptor and lift them out of the stroller
frame slots.
Tether strap
Ensure tether strap is used at all times. Make sure your hand is fed
through the loop as shown.
How to care for your stroller
Cleaning
To ensure the long-lasting use of your change table, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean
dry place.
Maintenance
Always check parts regularly for tightness of bolts, nuts and other fasteners – tighten or
replace if required. To maintain the safety of your change table, seek prompt repairs for bent,
torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difficulties in assembling the change table, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
