7
ASSEMBLY / OPERATING INSTRUCTIONS
To attach lower (thin) Top Side Rail...
To attach Foot End and Castors...
To insert the Crib Mesh...
1
1
1
2
Attach both lower (thin) top side rails onto the
headboard by aligning them with the lower holes in
the headboard directly under the upper (thick) top
side rail. Insert one dowel per rail.
Ensure that the label “A” & “B” on the top side
rail is matched to the label “A” & “B” on the
headboard.
Insert two bolts, ensure that they are secured but not
tight.
Attach the foot end by aligning it with the top
side rails and bottom shelf grooves.
Insert and secure the remaining six bolts into
the foot end.
Tighten all bolts on crib changer.
Insert all four castors into the legs of the
headboard and foot end, press firmly to
ensure they are secure.
Insert the crib mesh into the assembled crib frame.
Ensure the long side of the crib mesh corresponds
with the long sides of the crib frame.
Pull one lone side of the crib mesh through the
gaps between the upper (thick) top side rail and the
lower (thin) top side rail.
Slide a long rail through the seam as shown in the
image.
Repeat previous steps for the long seam and two
short seams.
1a.
1b.
1c.
1a.
1b.
1c.
1d.
1a.
1b.
1c.
2a.
2b.
PLEASE NOTE!
Ensure that the triangle point of all rails corresponds with the
shape of the gaps between the top side rails.
