6
ASSEMBLY / OPERATING INSTRUCTIONS
To attach Bottom Shelf...
To attach upper (thick) Top Side Rail...
1
1
Attach the bottom shelf rails onto the headboard
with one dowel and one bolt per rail.
Slide bottom shelf along the grooves of the bottom
shelf rails and into position.
Attach both upper (thick side rails onto the
headboard by aligning them with the upper holes
in the headboard. Insert one dowel per rail.
Ensure that the label “A” & “B” on the top side
rail is matched to the label “A” & “B” on the
headboard.
Insert two bolts, ensure that they are secured but not
tight.
It is advisable that two people assemble the crib in the room in which it is to be
used.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the cot is assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the crib is not scratched during assembly.
1a.
1b.
1a.
1b.
1c.
a.
b.
c.
d.
e.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
WARNING
