6
7
Attaching/Removing Brush Attachments
The steamer comes with two optional-use brush attachments recommended
for use with a variety of fabrics and upholstery.
To Attach
: While the brush and steamer are cool,
gently attach the top of the brush over the top
of the steamer head and then press the tabs on
both sides of the brush until it snaps into place.
To Remove
: Allow the steamer to cool prior to
removing the brush. Gently pull on one side of
the tab to remove.
Brush Attachment
Usage
Soft Brush
For garments that call for low heat. Allows for use of
steam to remove lint, pet hair, dust, dirt, dander on
overcoat and down jacket.
Lint Brush
For any garments that call for medium to high heat.
Allows for use of steam to dry steam suits, sweaters,
wool fabric and plush cloth.
Filling the Water Tank
1. Unfold the steamer. Place the steamer on its base on a stable surface.
2. Hold the handle to stabilize the steamer and lift up
the removable water tank with the other hand.
3. Gently pull out the rubber water tank cover at the
top of the tank.
Tip:
Using distilled, purified or filtered water is highly recommended and
will reduce mineral buildup. Do not use oils, perfumes or scented additives.
4. Using the included measuring cup, pour water
into the opening and then close the rubber cover
securely.
5. Dry off any excess water from the tank. Push the water tank back into the
steamer until it clicks into place.
6. To refill at any time during use, turn the steamer off by pressing the power
button until the red indicator light is off, unplug from the outlet and follow
the above procedures.
Tip:
After refilling, allow to reheat for at least 40 seconds and then prime the
pump by holding steam button until steam forms.
