categories
weight limit
asym. offset (mm)
ERD (mm)
spok
es used
nipple
washer
ROAD
RS25 | 700C | 24 holes
1
115kg
-
587
Sapim CX-Ray & Sprint (RW drive side)
internal
-
RX25 | 700C | 24 holes
1
-
-
587
Sapim CX-Ray & Sprint (RW drive side)
internal
-
RR40 | 700C | 24 holes
1
-
-
557
Sapim CX-Ray & Sprint (RW drive side)
internal
-
RX40 | 700C | 24 holes
1
-
-
557
Sapim CX-Ray & Sprint (RW drive side)
internal
-
RX60 | 700C | 24 holes
1
-
-
517
Sapim CX-Ray & Sprint (RW drive side)
internal
-
RX80 | 700C | 24 holes
tba
tba
tba
tba
tba
tba
tba
GRAVEL
GR40 | 700C | 24 holes
2
-
-
557
Sapim CX-Ray & Sprint (RW drive side)
internal
-
GR25 | 650B | 24 holes
3
-
2
550
Sapim CX-Ray & Sprint (RW drive side)
internal
-
GR25 | 700C | 24 holes
3
-
2
587
Sapim CX-Ray & Sprint (RW drive side)
internal
-
MTB
XC25 | 27,5“ | 28 or 32 holes
3
-
2
550
Sapim CX-Ray & Sprint (RW drive side)
internal
-
XC25 | 29“ | 28 or 32 holes
3
-
2
587
Sapim CX-Ray & Sprint (RW drive side)
internal
-
XS30 | 29“ | 28 or 32 holes
3
115kg
2
596
Sapim D-Light
external
yes
XC30 | 27,5“ | 28 or 32 holes
3
-
2
551
Sapim D-Light
external
yes
XC30 | 29“ | 28 or 32 holes
3
-
2
587
Sapim D-Light
external
yes
TR30 | 27,5“ | 28 or 32 holes
4
-
2
550
Sapim D-Light
external
yes
TR30 | 29“ | 28 or 32 holes
4
-
2
587
Sapim D-Light
external
yes
ED30 | 27,5“ | 28 or 32 holes
5
-
2
551
Sapim D-Light
external
yes
ED30 | 29“ | 28 or 32 holes
5
-
2
587
Sapim D-Light
external
yes
HY30 | 27,5“ | 28 or 32 holes
tba
tba
tba
tba
tba
tba
tba
HY30 | 29“ | 28 or 32 holes
tba
tba
tba
tba
tba
tba
tba
HY35 | 27,5“ | 28 or 32 holes
5
-
3
550
Sapim Force
external
yes
HY35 | 29“ | 28 or 32 holes
5
-
3
588
Sapim Force
external
yes
DH30 | 27,5“ | 28 or 32 holes
6
-
2
552
Sapim Force
external
yes
DH30 | 29“ | 28 or 32 holes
6
-
2
590
Sapim Force
external
yes
V2021.01
Page 3
INSTALLATION
GENERAL INFORMATION
Before installation, make sure that the installation dimension of the
hub fits your fork and frame.
Please read the hub instructions carefully before installing the
wheelset. You can find these under:
https://www.dtswiss.com/en/support/manuals
Only use valves with a suitable diameter and sufficient length. The
valve hole must not be modified.
Do not use metal tire levers. These can damage the surface of the
rim, the tire or the tube.
Attention: Maximum tire pressure
The maximum tire pressure of the wheel and the
tire used must not be exceeded. Details can be
found in the enclosed note „Tire Pressure“ or at
www.beast-components.de/en/service.
FITTING TIRES WITH A TUBE
Attach the rim tape. Assemble the inner tube and tire according
to the manufacturer‘s specifications. We recommend using soapy
water or installation fluid. Pump the tires up to their maximum
approved pressure. The lower of the pressures specified for the rim
or tire applies (Details can be found in the enclosed tire pressure
information or at www.beast-components.de/service). Check the
tire seat. The tire must contact the rim evenly around its entire
circumference. Have the tire seat checked by a professional if in
any doubt. If necessary, reduce the tire pressure to the desired
operating pressure.
FITTING THE TIRES WITHOUT A TUBE
Make sure that the tubeless tape and a tubeless valve are mounted.
The Tubeless Tape and the valve must be used in the width and
height suitable for the rim. Please refer to the tables on the next
page.
Put sealant fluid into the tires. Comply with the instructions of
the sealant manufacturer. Assemble the wheels according to the
manufacturer‘s specifications. We recommend using soapy water
or installation fluid.
INSTRUCTION MANUAL
WHEELSET
