18
English
To restart scanning, press and hold the "CH" button on the back of the main unit for
3 seconds until the connection symbol in the display starts flashing.
The weather station will now automatically search for the outdoor sensor in the
configured channel (CH1, CH2 or CH3) again.
8 Display
Time display:
The time can be displayed in a 12-hour
or 24-hour format. This can be config
-
ured in the time settings.
Date and day:
The weather station has a date and day display. The date
is displayed in the lower section and the day in the upper
section. The pre-configured language is German. If you want
to change the language, please refer to the section "Basic
settings" for more information.
DCF symbol:
The radio tower symbol indicates that the DCF signal has been
successfully received. The weather station synchronises the time every night. The
symbol begins flashing during synchronisation. If the time has been successfully
received, then the symbol glows constantly until the next synchronisation.
Indoor temperature display:
The indoor temperature is measured by the base station and is shown with an ac
-
curacy of one tenth of a degree. The configured temperature unit is displayed to
the right of the measured value. The temperature unit can be changed between °
Содержание 20170706FZ007
Страница 1: ...Wetterstation Mod Nr 302670 20170706FZ007 ...
