6
4 INCH CHIPPER
Section
5. Mount that completed hopper assembly to the chipper
housing using four 3/8 x 1" bolts (4) and 3/8-16 nylock
nuts (5).
2
ASSEMBLY
1.
Align wheels (1) with lug bolts on axle hub and secure
to hub using four 1/2" lug nuts (2). Using as alternating
pattern, tighten wheel into place and torque lug nuts
(2) to 75 ft-lbs.
2.
Place hitch pole channel (3) in
position underneath trailer deck
and mount to trailer deck using two
3/8 x 1" bolts (4) and 3/8-16 nylock
nuts (5).
3.
Apply reflectors (6) to the hitch
pole assembly (7) as shown. Next,
place entire hitch pole assembly
(7) into the hitch pole channel (3)
while aligning the front two holes
with the top two holes in the hitch
pole channel (3) flanges. Secure
using two 3/8 x 3" bolts (8) and
3/8-16 nylock nuts (5). Place hitch
pin (9) through bottom rear hole of
flange (Figure 2.1) and secure with
cotter pin.
4.
Attach chipper chute flap (10) to
hopper assembly (11) using the
retaining strip (12), three 5/16 x 1"
bolts (13) and 5/16-18 nylock nuts
(14).
2.1 ASSEMBLY (NON-CE COMPLIANT)
Figure 2.1, Hopper and Hitch Assembly
1
2
3
6
7
8
9
10
11
12
13
14
4
5
5
4
5
If any bolts or nuts are dropped in the machine, be
sure to remove them before starting the machine.
WARNING
Before beginning the assembly of the attachments
on this chipper, brace and/or stabilize the machine to
prevent it from moving, falling or tipping that may result
in serious injury.
WARNING
