Beamz LED PARBAR 4Way Kit 7x 10Watt Quad LED DMX, Инструкция по эксплуатации

Страница: 7 / 8

7
4th PAR
13 channel
0 light closed
1-255 Red 0-100%
14 channel
0 light closed
1-255 Green 0-100%
15 channel
0 light closed
1-255 Blue 0-100%
16 channel
0 light closed
1-255 White 0-100%
ALL PARS
17 channel
0 light closed
1-255 Dimmer
18 channel
0 light closed
1-255 Strobe speed
19 channel
0-5 light closed
6-100 Color change (slof to fast
101-200 Color auto run
201-255 Sound control
Foot Controller
1. Power IN
2. On/Off switch
3. Mode switch
4. Up switch
5. Down switch
Modes Sub selection Display
Static color select Choose from 9 preset colors Col 1 ‐ 9
Show select
Choose from 13 preset shows all sound to light activated except
fade SH 0 ‐ 12
Color fade Fade
Show select (no sound to
light mode) None SH 0 ‐ 12
Sound to light mode None SH 0

If you press a button on the rear panel with the foot controller connected, the Parbar will turn off the foot controller and
you will have to reset the power in order for it to work again.
Master/Slave operation
Master/slave operation is linking more than 1 LED Parbar together (DMX-in / DMX-out on the Bar).