Beamz illusion 2, Инструкция по эксплуатации

Страница: 6 / 40

6
6
）
Sound sensitivity Setting (before this setting, please Press MENU into < Lost> to select <Sound> and save, fixture
should be in Sound Mode first)
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then press ENTER to enter (Sound send)
3. Press <Up/Down>, <Enter> to adjust the sound sensitivity from 000-099.
4. Press <Enter> to confirm, or press "MENU" to exit.
7) Pan angle setting
1. Press<MENU> to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (Panmotor Angl).
3. Press<Up/Down
> to choose ‘630’ or ‘540’.
4. Press <Enter> to confirm, or press "MENU" to exit.
8) Pan reverse setting
1. Press<MENU> to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (Pan invert).
3.
Press<Up/Down> to choose ‘YES’ or ‘NO’
4. Press <Enter> to confirm, or press "MENU" to exit.
9) Tilt reverse setting
1. Press<MENU> to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (Tiilt invert).
3.
Press<Up/Down> to choose ‘YES’ or ‘NO’.
4. Press <Enter> to confirm, or press "MENU" to exit.
10) Pan fine setting
1. Press<MENU> to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (Pan fine)
3.
Press<Up/Down> to choose ‘000-255”’ Press <Enter> to confirm,or press "MENU" to exit.
11) TILT fine setting
1. Press<MENU> to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (Tilt fine)
3.
Press<Up/Down> to choose ‘000-255”’
4. Press <Enter> to confirm, or press "MENU" to exit.
12
）
LED back light setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (Display Bklight).
3.
Press<Up/Down> to choose ‘ON’ or ‘OFF’.
4. Press <Enter> to confirm, or press "MENU" to exit.
13) Working time
1. Press < ENTER> to enter EDIT interface.
2. Press < UP/DOWN>, then press < ENTER> (TotalRun Time) to check the
light’s working time.
3. Press <Enter> to confirm, or press "MENU" to exit.
14
）
Software Version
1. Press < ENTER> to enter EDIT interface.
2. Press < UP/DOWN>, then press < ENTER> (Software Version) to check the l
ight’s version information.
3. Press <Enter> to confirm, or press "MENU" to exit.
15
）
Whole fixture reset
1. Press< MENU> to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (ALL Reset).
3. After reset, it will go back to the upper interface
16
）
Factory default settings
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER to enter (ALL Default).
3. Press<Enter> to confirm, or press "MENU" to exit.