POWERBRUSH FEATURES
1.
Poly-V Belt – The poly-v belt is designed for positive drive, and it will not stretch or slip. The long life of the sturdy
poly-v belt also reduces the need for frequent replacement.
2.
LED Lamp – The super bright light of the LED (Light Emitting Diode) lamp allows for better vision in poorly lit areas
for more thorough cleaning. It is also much more durable than incandescent or halogen bulbs.
3.
Height Adjustment Pedal– The cleaning height can be adjusted by stepping on the Height Adjustment Pedal located
on the rear of the hood, near the wand release. The height will change between low, medium and high.
4.
Height Adjustment LED Indicator– The Carpet Height Indicators located in the display panel on the hood of the
powerbrush (see figure 2) will glow red in color depending on the height setting. At the lowest setting one LED will be
illuminated, and at the highest setting all 3 LEDs will be illuminated.
5.
Circuit Breaker Indicator – The electronic circuit breaker protects the motor and the cogged belt from damage should
a motor stall occur due to accidental pick up of a large object. The brush roll image located in the display panel on the
hood of the powerbrush (see figure 2) will glow red in color for a stalled or jammed condition.
CAUTION!
TO REDUCE THE RISK OF INJURY
,
BRUSHROLL COULD SUDDENLY
RESTART
,
UNPLUG BEFORE SERVICING
.
When brushroll jam has been cleared, circuit breaker can be reset by switching hose handle switch “off” then “on”. Your
Powerbrush must be serviced by an authorized service center if it continues to trip the circuit breaker.
6.
Handle Release Pedal – The handle and wand is released from the upright position by stepping on the Handle Release
Pedal and pulling the handle back. When returned to the upright position, the handle will lock in place.
7.
Isolated Brush Compartment – The electrical compartment is totally separated from the sweeping area. This provides
user safety and shields the electric motor from dust and dirt to enhance motor life.
8.
Dual Ball Bearing Brush Roller – The rotating brush mechanism utilizes precision ball bearings for extra smooth run-
ning and durability.
9. Wheel Bearings - The rear wheels are equipped with sealed ball bearings providing a quiet long lasting assembly.
10. Wand Quick Release - The quick release neck (see figure 2) releases the wand from the powerbrush by stepping on the
neck peddle.
POWERBRUSH PARTS IDENTIFICATION
4
Figure 2
Height Adjustment Pedal
Height Adjustment
LED Indicator
LED Lights
Quick Release Neck
Handle Release
Pedal
Circuit Breaker Indicator
(glows red in color for a stalled
or jammed condition)
