Beam SatDOCK RST980, Инструкция по установке и эксплуатации

Страница: 32 / 43

RST980 INSTALLATION & USER MANUAL
32
Power-On Messages
Once your phone is powered on, you may see:
Message Description
Searching...
The phone is attempting to establish communications with the
satellite network.
Registering...
Your phone is registering with the network. When the process is
complete, you will see Registered.
Check Signal
Your phone is unable to establish registration with the satellite
network. Move to a location with a clear unobstructed view of
the sky.
Invalid Account Contact your service provider.
Enter Phone
Unlock Code Your phone was locked after the last use. Enter your four-digit
unlock code and press OK to proceed.
Enter PIN
Enter the four- to eight-digit SIM card PIN code provided by
your service provider and press OK to proceed.
Insert Card
Power off your phone, make sure your SIM card is inserted
completely, and then power your phone on again.
Check Card The SIM card is damaged or inserted the wrong way.
Blocked
If the SIM card PIN code is incorrectly entered three times in a
row, your phone becomes blocked. Use **05* to proceed to
enter the PUK code.
! Blocked
If the SIM card PIN2 code is incorrectly entered three times in a
row, some features (e.g., Fixed Dialing) become blocked.
Bad Card See
Supplier Your SIM card has been damaged or incorrectly issued.
Contact your Service Provider for information.
Busy Try Later or
Please Try Later The phone is unable to access the network. Try again in a few
minutes.
Restricted Area
The phone is unable to access the network. Move to an area
where calls are allowed.
Redial? Press OK to redial the number automatically.
Follow the installation directions for installing the Antenna system that will be
provided with your antenna. Ensure that if an optional antenna was not supplied with
this kit, that the antenna is an approved Iridium antenna.