RST978 INSTALLATION & USER MANUAL
20
Installing the Cradle/Holder for the 9505A
Mount the cradle/holder so that the handset is within easy
reach of the driver during normal vehicle operation.
Allow enough room so that you can easily
insert the smart handset into and remove it
from the cradle.
Ensure sufficient room is allowed for the use of the antenna
connector and antenna cable on the rear of the handset.
Securely mount the cradle in the desired location,
ensuring that it is not obstructing any of the vehicles
controls or accessories.
An optional mounting bracket may be used for more tailored
installations. Various brackets can be obtained from Auto
Electricians or automotive parts suppliers.
Installing the HFI Adapter Box
In most vehicles, the best location for mounting the HFI Adapter Box is under
the dash or under the front seat. The box must be protected from dirt and moisture
and must have adequate space for cooling. The box also requires adequate
space to allow for cable connection.
Ensure it is located within reaching distance of the 9505A when its it’s cradle
interface unit
To install the box, follow these steps:
1. Using the Hands Free Interface as a template, mark the whole locations.
2. Remove the bracket, and use an awl or similar device to start the holes at
the marked locations.
3. Drill the holes.
4. Mount the box using the six screws provided with the fuse kit.