RST600
INSTALLATION
&
USER
MANUAL
Safety Information
Note:
Read the following information before installing and using the BEAM RST600. Failing
to follow instructions may compromise the safety of the product and may result in
personal injury and/or equipment damage. Please consult your supplier if you have
any further questions.
Your RST600 is a low power radio transmitter and receiver. When it is ON, it receives and sends out
radio frequency (RF) signals.
The design of your RST600 system complies with international safety standards.
Refer to the appropriate section of the
RST600 User Manual
for additional relevant safety information.
WARNING:
Do not open equipment. There are no user-serviceable parts inside.
If a DC power supply is to be used and connected to the DC leads, its output must
comply with the Safety Extra Low Voltage (SELV) requirements of IEC60950.
All connectors must only be connected to equipment ports which comply with the Safety
Extra Low Voltage (SELV) requirements of IEC60950.”
4
