RST600
INSTALLATION
&
USER
MANUAL
Installing the RST600
Warning:
Make sure the power is Not connected to the RST600 before you insert or remove
the SIM card. If you do not, the memory on your SIM card may be damaged.
Installing / Removing the SIM Card
1. Use the supplied Allen key (socket wrench to remove the screw on the transceiver module to
remove the SIM card cover plate as shown. Keep the screws in a safe place whilst you install / remove
the SIM card.
2. Once the cover is removed slide the plastic SIM card holder sleeve (opposite direction of the arrow)
to release it from the locked position.
3. Insert the SIM card as shown, with the golden connectors facing inwards and the ‘cut corner’ of the
SIM card facing uppermost.
4. Close the plastic sleeve down, and slide in the direction of the arrow until you feel it click into place.
5. Replace the cover, and fasten the screw.
Scratching or bending the SIM card can easily damage the card or its metal contacts. So
handle the SIM card with care. Avoid exposing the card to static electricity, water or dirt.
10
