RST050
INSTALLATION
&
USER
MANUAL
4
Safety Information
Note:
Read the following information before installing and using the
BEAM RST 050.
Your RST 050 is a low power electronic device.
When it is ON, it stores and supplies energy to the attached Beam equipment.
The design of your RST 050 system complies with international safety standards.
Warning:
Do not open equipment. There are no user-serviceable
parts inside. Return product to manufacturer for servicing.
If a DC power supply is to be used, its output must comply with the
Safety Extra Low Voltage (SELV) requirements of IEC60950.
All connectors must only be connected to equipment ports which
comply with the Safety Extra Low Voltage (SELV) requirements of
IEC60950.”
Ensure adequate ventilation. Do not use equipment in a gas-tight
chamber.
Do not short circuit output.
