Beam IsatDock2 PRO, Руководство пользователя

Страница: 24 / 36

24
IsatDock2 PRO Usage
Operation of the IsatPhone 2
Prepare the Inmarsat IsatPhone 2
Ensure that the IsatPhone 2 Handset has the latest
compatible firmware installed. For more information
visit:
www.beamcommunications.com/support/
isd2pro
Starting Up
1. Retract the antenna on the IsatPhone
2 handset and place in slightly open
position.
2. Place the IsatPhone 2 as per instructions
“Docking & Undocking” on page 14.
3. Turn vehicle ignition on. The IsatPhone 2 will
automatically power and the handset will
then start to initialise followed by a 3 tone
rising beep when a successful connection
has been made between the docking station
and the IsatPhone 2.
4. Wait for the IsatPhone 2 handset to register
on the Inmarsat network. The STATUS LED on
the docking station will turn green when a
successful registration has taken place.
5. You are now ready to make and receive calls.
temperature is reduced.
Placing Voice Calls
Bluetooth
®
calls via IsatPhone 2
The IsatDock2 PRO allows for Bluetooth audio
calls to be placed via the IsatPhone 2 handset
while docked. Consult the IsatPhone 2 manual
for further information on pairing and Bluetooth
discovery setup.
Speakerphone Phone Call Use
Mobile Originating
1. By default the IsatDock2 PRO will start all
calls in speakerphone mode when dialing on
the keypad without RJ11 or privacy handset
off hook.
2. Dial using the full Inmarsat dialing sequence
eg. 00 country code and telephone number
on the IsatPhone 2 keypad whilst docked.
Press the GREEN button to start the
connection.
3. A message will display on the IsatPhone 2
handset to indicate the call is progressing.
4. Once the call is connected, the STATUS LED
will flash to indicate a call is in progress.
5. Press the RED key on the IsatPhone 2
handset or press the speakerphone button to
terminate the call.
NOTE:
1. If the IsatPhone 2 is removed from the dock during
a call, the call will drop out during this transition
2. One common cause for connection failure
is a flat IsatPhone 2 battery which prevents
the IsatPhone 2 from turning ON. In these
instances the docking station will attempt
to charge the IsatPhone 2 handset while it is
switched OFF, until enough charge is present
for the IsatPhone 2 to turn ON. This charging
period can take up to 20 minutes depending on
how flat the battery.
Pro handset
The IsatDock2 PRO provides charging power to the
IsatPhone 2 handset via its USB connector.
The IsatPhone 2 battery is a lithium-ion cell which
has a safety temperature range whilst charging.
This range is from 0 to 45 degrees Celsius (32 to
113 degrees Fahrenheit).
Due to the increased heating effects on the
IsatPhone 2 handset whilst it is docked and being
charged, it is ideal for the ambient temperature
to be at least 18 degrees below the 45
o C upper
limit for the handset to charge the battery whilst
docked. If the battery temperature exceeds this limit,
then the IsatPhone 2 may cease charging until the