manualshive.com logo in svg

Beam IsatDock2 PRO, Руководство пользователя

Поделиться
Скачать
Beam IsatDock2 PRO Скачать руководство пользователя страница 17

IsatDock2 PRO - User Manual

17

2a) Wall Mounting Orientation

There are nine screw holes available for mounting 
the bracket to a wall.  It is recommended that 
a minimum of 2 screws are used to ensure the 
docking station is mounted securely.

There are four keyhole shaped slots in the 
mounting bracket that mate with feet on the 
rear of the docking station.  To attach the 
bracket, the larger end of the keyhole will pass 
over the feet.  The dock is then slid down to lock 
the feet into the narrow section of the keyhole. 

NOTE

Refer to the ISD700 Directional/Fixed Antenna 
(Passive),  ISD715 Transport Magnetic Antenna 
(Active) and ISD720 Transport Bolt Antenna (Active) 
Installation Guides for more information on antenna 
placement and installation. These Installation guides 
can be found on our website.  
Please visit: 

www.beamcommunications.com

Only Beam approved antenna cables should be used 
with all docking stations and antennas.

WARNING

DO NOT pull with force on the cables from the rear 
of the IsatDock2 PRO. Please install strain relief 
clamping for the antenna cables where required.
Correct installation of the antenna system is a 
vital part of the IsatDock2 PRO system, to ensure 
reliable functionality, and drop-free calls.

WARNING

Changes or modifications not expressly
approved by Beam Communications could void
the product warranty.

WARNING  

To satisfy FCC RF exposure requirements for mobile 
transmitting devices, a separation distance of 
55cm or more should be maintained between the 
antenna of this device and persons during device 
operation. To ensure compliance, operations at 
closer than this distance is not recommended.

ISD700

Directional/Fixed Antenna 

(Passive) with Bracket

Transport Antenna 

(Active)

ISD715

Magnetic 

Mounting

ISD720

Bolt  

Mounting

Содержание IsatDock2 PRO





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды