BeagleBone LCD7 Cape, Справочное руководство

Страница: 27 / 27

BeagleBone LCD7 Cape System Reference Manual Revision A3
Page 27 of 27
7.0 Design Materials
Design information can be found at BeagleBoardToys wiki:
http://beagleboardtoys.com/wiki/index.php?title=BeagleBone_LCD7
Provided there is:
- Schematic in PDF
- Schematic in OrCAD
- Manufacturing files
o
PCB Gerber
o
PCB Layout (Allegro)
- Bill of Materials
- System Reference Manual (This document)
These design materials are *NOT SUPPORTED* and DO NOT constitute a reference
design. Only “community” support is allowed via resources at BeagleBoard.org/discuss.
THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
DESIGN MATERIALS “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
DESIGN MATERIALS IS WITH YOU. SHOULD THE DESIGN MATERIALS PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
We mean it, these design materials may be totally unsuitable for any purposes.