REF: BBONEBLK_SRM
BeagleBone Black System
Reference Manual
Rev A5.2
Page 68 of 108
7.0
Connectors
This section describes each of the connectors on the board.
7.1
Expansion Connectors
The expansion interface on the board is comprised of two 46 pin connectors. All signals
on the expansion headers are
3.3V
unless otherwise indicated.
NOTE: Do not connect 5V logic level signals to these pins or the board will be
damaged.
Figure 44
shows the location of the expansion connectors.
Figure 44.
Expansion Connector Location
The location and spacing of the expansion headers are the same as on the original
BeagleBone.
Содержание BBONEBLK_SRM
Страница 103: ...REF BBONEBLK_SRM BeagleBone Black System Reference Manual Rev A5 2 Page 103 of 108 Figure 65 Component Side Silkscreen...
Страница 104: ...REF BBONEBLK_SRM BeagleBone Black System Reference Manual Rev A5 2 Page 104 of 108 Figure 66 Component Side Silkscreen...
Страница 105: ...REF BBONEBLK_SRM BeagleBone Black System Reference Manual Rev A5 2 Page 105 of 108 10 0 Pictures Figure 67 Top Side...
Страница 106: ...REF BBONEBLK_SRM BeagleBone Black System Reference Manual Rev A5 2 Page 106 of 108 Figure 68 Bottom Side...
