BeaconMedaes VerusLab 4107 9021 88, Инструкции по установке, эксплуатации и обслуживанию

Страница: 9 / 78

Safety Precautions
The operator should carefully read the entire
contents of this manual before installing, wiring,
starting, operating, adjusting and maintaining
the system.
The operator is expected to use common-sense
safety precautions, good workmanship practices
and follow any related local safety precautions.
In addition:
• Before starting any installation or
maintenance procedures, disconnect all
power to the package.
• All electrical procedures must be in
compliance with all national, state, and local
codes and requirements.
• A certi fi ed electrician should connect all
wiring.
• Refer to the electrical wiring diagram
provided with the unit before starting any
installation or maintenance work.
• Release all vacuum from the a ff ected
components before removing, loosening,
or servicing any covers, guards, fi ttings,
connections, or other devices.
• Notify appropriate facility personnel if
repairs or maintenance will a ff ect available
vacuum levels.
• This is a high speed, rotating piece of
machinery. Do not attempt to service any
part while machine is in operation.
• To prevent automatic starting, disconnect
all electrical power before performing any
maintenance functions.
• Do not operate unit without guards, shields
or screens in place.
• Make sure that all loose articles, packing
material, and tools are clear of the package.
• Check all safety devices periodically for
proper operation.
• Electrical service must be the same as
speci fi ed on the control panel nameplate or
damage to the equipment may occur.
• Vibration during shipment can loosen
electrical terminals, fuse inserts, and
mechanical connections. Tighten all electrical
connections prior to energizing the control
panel
Lubricated Rotary Vane Laboratory Vacuum Systems
4107 9021 88.01 vi