User Guide v1.0
AnkhMaway-OFA
SI
Simplify Your Life
MPLIFY LIFE
13
Table 12. Characteristics of service 0xFF80
Note: The value needs to be input the port should be converted to hexadecimal ASCII characters.
For example, the corresponding hexadecimal ASCII for Jaalee is{0x6A,0x61,0x61,0x6C,0x65,0x65},
then the value should be input is 0x6A61616C6565 .
Service 0x1804
Table 13. Characteristics of service 0x1804
Characteristic
Property
Value Length
Function
Write example
0x2A07
Read/Write
1 Byte
Configure TX Power
0x01
Note: The relationship between the value input and its corresponding TX Power is as the following
table.
Table 14. TX Power Settings
Service 0xFF70
Table 15. Characteristics of service 0xFF70
Characteristic Property
Value Length Function
Write example
0x2A80
Read/Write 1 Byte
Configure Beacon State
0x01:Disable
0x2A81
Read/Write 1 Byte
configure the broadcast rate
0x0A
0x2A82
Read/Write 1 Byte
check the tap-switched mode
0x01:Enable
0x02:Disable
0x2A83
Read/Write 1 Byte
Set the intensity of
motion detection
0x09(0x01-0x7F)
Note: The broadcast rate of iBeacon is same with the values under 0xFFF0->0xFFF6.
Notice: if the tap switch mode is disabled and the iBeacon is not in the connectable mode, users
need to reinsert the battery, then user can switch to connectable mode.
Service 0xFF60
Table 16. Characteristics of service 0xFF60
Characteristic
Property
Value Length Function
Write example
0x2A70
Read/Write 1 Byte
Control Beacon Audio State
0x01
Notes: When the value is 0x01, means allowing the Beacon buzzing when wake-up or reset.
0x01: Buzzing when starting or tapped (default state).
Characteristic
Property
Value Length
Function
Write example
0x2A90
Read/Write
18 Bytes
Configure Device Name 0x6A61616C6565
Write Value
0x01
0x02
0x03 0x04 0x05 0x06
0x07 0x08 0x09
TX Power(dBm)
4
0
-4
-8
-12
-16
-20
-30
-40
