7
After the connection is established, the AV-901R will display the
screen that is connected to that KV-901T.
3.3
Other System menu Functions
When the
[source]
button of AV-901R is pressed, the system
menu OSD will pop out. You can press the
[source]
button to
navigate other System menu functions.
3.3.1
VGA SYNC:
This function is only available when the KV-
901T is connected with VGA input, when the picture shifts
from screen, use this function to auto adjust the picture.
3.3.2
REFRESH:
To refresh the KV-901T Transmitters list.
3.3.3
KV-901T SETTING:
Use
this function to setup KV-901T:
3.3.3.1 MULTI/ONE AV-901R:
To set KV-901T in Multicast mode
(for one-to-many) or Unicast mode (for one-to-one).
3.3.3.2 BANDWIDTH SETTING:
KV-901T has 3 levels of bandwidth:
LOW, MID, HIGH. Please note to set LOW, it will use lower
network bandwidth and get a more efficient performance
but will come with lower image quality.
3.3.3.3
INFORMATION:
Show the KV-901T/AV-901R basic
information:
3.3.4
AV-901R OFF:
To disable the connection between the AV-
901R and the currently connected KV-901T. To enable the
connection, press the push button again.
>MULTI/ONE AV-901R
>BANDWDITH SETTING
>INFORMATION
>EXIT
KV-901T
VERSION aa26
SUPPORT MULTI AV-901R
BANDWIDTH LOW
DVI IN 1024 X 768
AV-901R
VERSION a901 0126
IP 192.168.168.22
VGA OUT 1024 X 768
MIC IN
INTERNAL IR
AV-901R off
