Page 4 of 4
75.5858.02 900 MHZ INDUSTRIAL 20160205
PLEASE KEEP FOR FUR
THER USE – DESIGNED FOR COLOR PRINTING
©
BE
A
| O
rig
in
al
In
st
ru
ct
io
ns
|
75
.5
85
8.
02 9
00
M
H
Z I
N
D
U
ST
RI
A
L 2
01
60
20
5
TECHNICAL SPECIFICATIONS
Frequency:
908-918 MHz (frequency hopping)
Emitted radio power:
-25 dBm (TX)
Power consumption:
13 mA (Transmitter)
40mA (Receiver)
Supply voltage:
12-24 VAC/DC
Contact rating:
1.0 A @ 30 VDC
0.5 A @ 125 VAC
0.3 A @ 60 VDC
Temperature range:
14°F to 131°F (-10°C to 55°C)
Programmable units per receiver:
74
LEDs:
red (receiver learn)
blue (relay activation)
tri-color (signal strength)
Dimensions:
2.5” (W) x 2.0” (D) x 0.75” (H) [RD900]
1.5” (W) x 3.0” (D) x 0.5” (H) [Transmitter]
Transmitter Protection Rate
IP65
Certification:
FCC, IC
Specifications are subject to changes without prior notice.
All values measured in specific conditions
FCC / IC
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.”
Changes or modifications not expressly approved by BEA Incorporated could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
FCC ID: 2ABWS-10RD900
IC: 4680A-10RD900
MODEL: 10RD900
FCC ID:
IC:
MODEL: 10TD900INDHH1
FCC ID:
IC:
MODEL: 10TD900INDHH2
FCC ID:
IC:
MODEL: 10TD900INDHH3
FCC ID:
IC:
MODEL: 10TD900INDHH4