BEA RD900 Скачать руководство пользователя страница 3

75.5858.02 900 MHZ INDUSTRIAL 20160205   

Page 3 of 4

All Transmitters

Removing Transmitters

Single Transmitter

1

2

1

Press BOTH learn buttons until 

red LED flashes once (~2 s).

Press BOTH learn buttons until 

blue LED illuminates (~10 s).

Press transmiter TWICE within 

10 seconds.

Battery Replacement

Handheld (TD900INDHHx)

1

2

Remove back three (3) screws 

and disassemble.

Replace two (2) 3V (CR2032) batteries 

observing polarity and reassemble.

Low Battery Indicator - After transmitter button is pressed, low battery is indicated by three (3) transmitter LED blinks.

NOTE: All transmitters must ONLY be powered with provided batteries or equivalent.

SINGAL STRENGTH INDICATION

3 V

3 V

x2

red LED on receiver 

flickering; unable to 

program

stuck push plate

disconnect push plates to determine which is 

stuck (LED should go out)

faulty transmitter

if LED does not go out, remove transmitter 

batteries to determine which is faulty, replace 

transmitter

weak signal

receiver antenna positioned 

poorly

position antenna outside of door header

TROUBLESHOOTING

Pressing and hold transmitter button for 

at least 5 seconds activates singal strength 

tri-color LED on receiver

Green LED on

Red LED on

Strong signal

Weak signal

Yellow LED on

Medium signal

Содержание RD900

Страница 1: ... 2 antenna wire 3 blue activation LED 4 red learn LED 5 tri color signal strength LED 6 DIP switches 7 no delay learn button 8 delay learn button 9 delay learn potentiometer 10 transmitter 2 3 4 5 10 HAND HELD TRANSMITTERS DESCRIPTION 4 BUTTON 3 BUTTON 2 BUTTON IMPORTANT This product is NOT intended for use directly with Magnetic Locks or Electric Strikes Contact BEA Technical Support for further ...

Страница 2: ...repair of the components All repairs and or component replacements must be performed by BEA Inc Unauthorized disassembly or repair 1 May jeopardize personal safety and may expose one to the risk of electrical shock 2 May adversely affect the safe and reliable performance of the product resulting in a voided warranty Hand Held Configuration INSTALLATION Wiring TERMINAL 1 2 3 4 5 LABEL 12 24 V 12 24...

Страница 3: ...cated by three 3 transmitter LED blinks NOTE All transmitters must ONLY be powered with provided batteries or equivalent SINGAL STRENGTH INDICATION 3V 3V x2 red LED on receiver flickering unable to program stuck push plate disconnect push plates to determine which is stuck LED should go out faulty transmitter if LED does not go out remove transmitter batteries to determine which is faulty replace ...

Страница 4: ...y with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interferen...

Отзывы: