Page 2 of 8
75.5863.04 PHOENIX EX 20210701
• The sensor must be firmly fastened in order not to vibrate.
• The sensor must not be placed directly behind a panel or any kind of material.
• The sensor must not have any object likely to move or vibrate in its sensing field.
• The sensor must not have any fluorescent lighting in its sensing field.
• The sensor housing cover is adjusted at factory; there is no need to adjust at installation location.
INSTALLATION TIPS
MICROWAVE SENSOR SPECIFICATIONS
Technology:
microwave doppler radar
Transmitter frequency:
24.150 GHz
Transmitter radiated power:
< 20 dBm EIRP
Transmitter power density:
< 5 mW/cm
2
Anti-tamper:
1) product anti-tamper (magnetic switch within cover, alerts when cover is unscrewed)
2) application-based anti-tamper (tamper alert via end-of-line resistor)
Mounting height:
PHOENIX EX™: 11.5 − 23 ft; PHOENIX EX™XL: 6.5 − 11.5 ft;
PHOENIX EX™WIDE: 11.5 − 21 ft
Detection zone:
PHOENIX EX™: 13 x 16 ft @ 16ft; PHOENIX EX™XL: 13 x 6.5 ft @ 8.2ft
PHOENIX EX™WIDE: 30 x 11ft @ 21ft. (typical at 30° and field size 9)
Min. detection speed:
2 in/s*
Supply voltage:
12 − 24 VAC ±10%; 12 − 24 VDC +30% / -10%
Mains frequency:
50 − 60 Hz
Max. power consumption:
< 2W
Output**:
max. voltage:
max. current:
max. power:
relay (free of potential change-over contact)
42V AC/DC
1A (resistive)
30 W (DC) / 60 VA(AC)
Optional end-of-line resistor(s)
1/8 Watt
Temperature range:
-22 − 140 °F
Housing certification:
(Adalet / Scott Fetzer Co., UL Listing # E81696)
UL Class I, DIV 1 Group BCD; Class II, DIV 1 Group EFG; Class III;
NEMA Type 4X; IP66; UL 1203; CSA C22.2 No.30&CSA C22.2 No.25
FM 3615; ATEX (FLAMEPROOF - DEMKO), Ex d IIC, IEC60529
Dimensions:
9 in (L) x 7.5 in (W) x 5.5 in (H)
Materials:
Copper-free aluminum (Housing); Powder-coated steel (Bracket)
Weight:
10 lbs
Cable length:
100 ft (PHOENIX EX™100, PHOENIX EX™XL100, PHOENIX EX™WIDE)
30 ft (PHOENIX EX™, PHOENIX EX™XL)
Cable diameter:
1
⁄
4
” max
Electrical Access:
3
⁄
4
” NPT pipe thread
Norm conformity:
R&TTE 1999/5/EC; EMC 2004/108/EC
Specifications are subject to change without prior notice.
All values measured in specific conditions.
* Measured in optimal conditions
** Output ratings may vary depending on optional end-of-line
resistor
values