75.5916.03 LZR-WIDESCAN 20180821
Page 3 of 16
75.5916.03 LZR-WIDESCAN 20180821
Page 3 of 16
75.5916.03 LZR-WIDESCAN 20180821
Page 3 of 16
75.5916.03 LZR-WIDESCAN 20180821
Page 3 of 16
It is recommended to
clean the optical parts
at least once a year or
more if required due to
environmental conditions.
Do not use aggressive
products to clean the
optical parts.
Only trained and
qualified personnel
are recommended to
install and set up the
sensor.
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
Following installation,
always test for proper
operation before
leaving the premises.
The door control
unit and the header
cover profile must be
correctly grounded.
Avoid moving objects
and light sources in the
detection field.
Avoid exposure to sudden
and extreme temperature
changes.
Avoid direct exposure to
high-pressure cleaning.
Avoid extreme vibrations.
Do not cover the sensor.
Do not look directly
into the laser emitter
or the visible red laser
beams.
CAUTION!
Use of controls, adjustments, or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
The device contains IR and visible laser diodes.
IR laser: wavelength 905nm; max. output pulse power 75W
(Class 1 according to IEC 60825-1)
Visible laser: wavelength 650nm; max. output CW power 3mW
(Class 3R according to IEC 60825-1)
The visible laser beams are inactive during normal functioning.
The installer can activate the visible lasers if needed.
Keep the protection film
during the mounting
of the sensor. Remove
it before launching a
teach-in.
INSTALLATION & MAINTENANCE TIPS
SAFETY
