2
Avoid extreme
vibrations.
Do not cover
the front screens.
Avoid moving objects
and light sources in
the detection field.
Avoid condensation.
Avoid the presence
of smoke and fog in
the detection field.
Avoid exposure to
sudden and extreme
temperature changes.
Keep the sensor
permanently powered
in environments where
the temperature can
descend below -10°C.
Wipe the front
screens regularly
with a clean and
damp cloth.
Do not use aggressive
products to clean
the front screens.
Avoid direct exposure
to high pressure
cleaning.
SAFETY
INSTALLATION AND MAINTENANCE
Do not stare into the
visible red laser beams.
The warranty is void if
unauthorized repairs are
made or attempted by
unauthorized personnel.
Only trained and qualified
personnel may install and
adjust the sensor.
The manufacturer of the door system is responsible for carrying out a risk assessment and installing the sensor and the
door system in compliance with applicable national and international regulations and standards on door safety. Other
use of the device is outside the permitted purpose and can not be guaranteed by the manufacturer. The manufacturer
cannot be held responsible for incorrect installations or inappropriate adjustments of the sensor.
Test the good functioning
of the installation before
leaving the premises.
The device emits invisible IR and visible laser radiation.
IR laser: wavelength 905nm; output power <0.10 mW
(Class 1 according to IEC 60825-1)
Visible laser: wavelength 635 nm; max. output power <1 mW
(Class 2 according to IEC 60825-1)
The visible laser beams are inactive during normal functioning.
The installer can activate the visible lasers if needed.
Do not stare into visible laser beams.
CAUTION!
Use of controls, adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.