75.5667.10 LZR-I30 20161212
Page 5 of 12
1
2
3
4
5
1
2
45°
45°
+
-
+
-
CAT2
Pl d
75.5667.10 LZR-I30 20161212
Page 5 of 12
Door control without test:
connect blue and blue/white
wires to power supply (no
polarity).
Use the mounting template to
position the sensor correctly. The
grey area indicates the detection
range. Drill 4 holes and make a
hole for the cable.
Pass the cable +/- 4 in though
the cable opening. If drilling an
opening is not possible, use the
cable conduits on the back side
of the bracket.
Position the bracket and fasten
the 4 screws firmly in order to
avoid vibrations.
Position the housing on the
bracket and turn the sensor until
the two triangles are face to face.
MOUNTING
WIRING
POWER SUPPLY
RELAY 1 - OPTIONAL FIELD
RELAY 2 - SAFETY FIELD
TEST
NOT USED
RED
BLACK
WHITE
GREEN
WHITE/BLACK
GREEN/WHITE
BLUE
BLUE/WHITE
ORANGE
ORANGE/BLACK
Open the protection cover, plug
the connector and position the
cable in the slit.
Close the protection cover and
fasten it firmly.
Use the LBA accessory if needed.
4 in
1 in
1 in
