manualshive.com logo in svg

BEA LZR-H100, Руководство пользователя, Страница: 7 / 16

Поделиться
Скачать
BEA LZR-H100 Скачать руководство пользователя страница 7

75.5984.01 LZR-H100 20181221   

Page 7 of 16

75.5984.01 LZR-H100 20181221   

Page 7 of 16

L

min

 (in) h

min

 (in)

2          9.5           2
4          14            2.3
6          19            2.5

d (in) 

14 – 17 in

B

A

RECOMMENDED MOUNTING

Ensure there are no obstructions in front of the 

sensor!

Do not position the detection field as shown.

When using the safety, place the sensor just 

behind the barrier to ensure that the safety field 

protects the area around the barrier.

When using the safety, do not place the sensor 

before the barrier (A) or more than 15 inches after 

the barrier (B). The area around the barrier is not safe.

Install the sensor at a mounting height between 

14 – 17 inches. If the barrier is only used by 

trucks, the mouting height may be increased.

Do not cover the front face of the sensor with 

glass or plastic.

Ensure that the detection field is parallel to the 

barrier.

If the reference beam is too low or too high, 

contact with the barrier may occur.

Содержание LZR-H100

















Отзывы:

Нет отзывов