FACTORY VALUES
10
TEACH-IN
Teach-in: the scanner could automatically learn the environment profile as its detection field
with self-learning function; this feature provides great convenience when there are irregular
objects exist within the detection field which should be considered as background.
setting the field 1 through Teach-in.
setting the background through Teach-in.
setting the field 2 through Teach-in.
3s
3s
max. 30s
3s
3s
max. 30s
3s
3s
max. 30s
RESET TO
FACTORY
SETTINGS
reset all the parameters to factory settings.
reset all the parameters outside of the detection field to factory settings.
IMPORTANT: Test the good functioning of the installation before leaving the premises.
3s
3s
30s
setting the field 1&2 through Teach-in.
3s
3s
max. 30s
The ORANGE LED is on
permanently.
The scanner encounters a
memory problem.
Send the scanner back for a technical check-up.
The ORANGE LED flashes
1 x /2 x /3 x every
3 seconds.
The scanner signals an
internal fault.
If the internal error still exists
after 3 resettings, the LED will
flash 9 times and the scanner
will be locked.
1
Cut and restore power supply.
2
If orange LED flashes again, send the scanner back
to manufacturer.
The ORANGE LED flashes
4 x every 3 seconds.
Error for antimasking or
boundary.
1
Check if there’s pollution on front window.
2
Check if there’s problem of background.
The ORANGE LED flashes
5 x every 3 seconds.
Error happened during the
teach-in process.
Relaunch a teach-in process.
2
1
3
4
5
X. TROUBLESHOOTING
The FLATSCAN VS305 is designed to be able to give trouble shooting through LED.
10
