Rainbow 72 R NBC- Filtration & Ventilation System
Rainbow 72 R
Ventilation and Air Filtration System
for a Residential Safe Room ·
www.beind.co.il
9 |
3
2
1
3
1
2
1
Remove the bracket from the cabinet (the bracket is located
at the bottom of the manual blower). Open the two rear
tabs
(1)
and attach the flexible hose
(2)
to it. Attach the
bracket to the adapter on the wall by means of sliding the
bottom of the tabs into the appropriate slots, as much as
possible
(3)
. Follow steps 1- 6 in the Air Filter Operating
Instructions on pages 6-7.
2
Make sure that the other end of the connecting pipe is
connected to the air outlet opening in the filter
(1)
. Attach
the manual blower to the bracket using the connecting
pins. Adjust the blower to the pins on the adapter
(2)
.
Connect it by a short counterclockwise rotation and then
rotate it clockwise to the end
(3)
.
3
Start operation with an alternating pull and push action.
Run at 40 cycles per minute, making sure the
indicator vane spins.
This operation should be continued until power
supply returns.
Installation option 2:
Connection of a manual blower
to an adapter (mounted on the
wall) in a safe room where the
air-inlet valve is located at the
height of over 1.6 meters.
inlet valve over
1.6 meters high
