Rainbow 36 V NBC-Filtration & Ventilation System
Rainbow 36 V
Ventilation and Air Filtration System
for a Residential Safe Room
·
www.beind.co.il
7
|
Step 5
Step 4
Remove the cover of the air inlet valve
To remove the cover, push the safety button downward (if
there is one)
(1)
, and rotate the cover counterclockwise
(2)
.
Release the strap of the connecting hose (1)
and attach the loose end to the filter on the wall
(2)
.
Make sure that the inlet cable is attached to
the electric blower and attach the other end to
the wall outlet (1). Press the operating switch
on the blower (2).
(Wait a few seconds for the blower to start working.)
Attention!
The indicator vane on the air outlet valve will start
to spin after a few seconds--this indicates that the room is in the
required state of overpressure. In the event that the indicator vane
doesn’t rotate, this is a warning that the room is not properly sealed.
Attach the filter to the air inlet valve
Hold the filter by the handles and, with the blue arrow
pointing upward, insert the pins into the holes on
the flange that is on the wall
(1)
. Turn it clockwise
until the green arrow is pointing vertically and the
filter can’t be turned any more
(2)
.
Step 6
Step 7
Step 8
1
2
2
3
1
2
1
1
2
