Seite 25 von 32
OPERATION
You can set all functions directly on the unit.
Depending on the function set, the indicator lights on the control panel light up.
SWITCH ON THE UNIT
1. Connect the unit to the earthed socket.
2. Press the
- button to switch on the unit.
3. When the unit is switched on, it starts in smart mode.
4. The
- indicator lights up.
5. Press the
- button again to switch to standby mode.
6. In standby mode, the
- indicator lights up slightly.
NOTE
Never switch off the air purifier by pulling the plug directly from the mains. To switch off,
always press the on/off button and wait a few minutes before disconnecting the unit from the
mains. This allows the unit to go through a cycle of checks to verify its functionality.
SET FUNCTIONS
Smart mode
Optimal for everyday use, the unit itself controls how strongly the air is cleaned.
1. Press the
- button until the "Smart" indicator on the control element lights up.
2. To exit smart mode, press the
- button again.
Light sensor
The unit has a light sensor that adjusts the backlight and air quality indicator to the ambient
brightness when the unit is in smart mode.
When it is dark, the display illumination and the air quality indicator are dimmed down to a
minimum.
NOTE
It is recommended to use the unit in Smart mode. In Smart mode, the unit works most
efficiently as it regulates the fan speed automatically based on the level of particulate matter
in the room.
Fan speed listing based on PM2.5 value
Air quality
indicator Light
Blue
Green
Yellow
Red
PM2.5 value
0-50
50-100
100-150
150+
Fan stage
Low
Medium
High
Turbo
