Seite 22 von 24
MAINTENANCE AND CLEANING
Clean the appliance (every 2 weeks)
Before cleaning, switch off the appliance, wait a few minutes and then always unplug the
appliance from the electrical mains.
Clean the unit with a moderately damp cloth and then wipe it with a dry cloth.
For safety reasons, never clean the appliance with water. This could be dangerous.
Never use petrol, alcohol or solvents for cleaning.
Do not spray insecticides or similar agents on the air purifier.
Cleaning the filter cover (every 4 weeks)
To remove the dust accumulated in the cover, use a hoover.
If the cover is very dirty, you can immerse it in warm water and rinse it several times -
however, the water temperature should not exceed 40°C.
After washing, let the cover dry out well and then put it back in place.
NOTE
Never use the appliance without the filter cover.
Cleaning the 3-in-1 filter (every 4 weeks)
To remove the dust accumulated on the outside of the filter, use a hoover.
Remove the filter and place it in a well-ventilated place outside the living area for 12
hours.
This allows particles and substances accumulated in the filter to escape from the filter.
Replacing the filters (When the indicator flashes, approx. 6 months or 2,200
hours)
Replace the filter when the
- indicator flashes.
NOTE
When replacing the filter, proceed as described in the section "OPERATION".
Air quality sensor Cleaning (every 4 weeks)
The sensor should be cleaned if the unit displays incorrect values
The air quality sensor is located in the recessed grip on the right side of
the unit.
Take off the cover by pushing up the securing tab on the underside.
Clean the sensor with a dry cotton swab and put the cover back.
