Be Cool BC18KL2101F, Инструкция по эксплуатации, Страница: 31 / 40

Seite 31 von 40
Permanent water drain
In order not to empty the tank every time manually, you can
install a permanent water drain. This is especially recommended
for if you intend to use the device for a long period of time.
The air conditioner has two different permanent condensation
water outlets for two different Mode.
The permanent condensation water outlet on the TOP is for the
DEHUMIDIFIER-Mode.
The permanent condensation water outlet on the BOTTOM is
for the COOLING-Mode.
Please use the correct water outlet for permanent
installation, because the outlets are tuned to each mode.
To install the permanent water drain, please proceed as follows:
 Before fitting a suitable drain hose to the outlet, the
water tank must be completely drained.
 Remove the plug of the permanent condensation water
outlet and attach the drain hose.
 Put the other end of the hose into a catchment container
or drain making sure that the hose is not located higher
than the drain valve and that it’s not kinked.
 Carefully re-attach the plug if you choose to remove the
permanent drain.
NOTE:
You can also attach both hoses at once, if you do not want to
change them while changing the modes.
For the permanent water
drain you need a water
exhaust hose with the
following dimensions:
16x1mm
(not included in the
delivery)
TASKS AT BEGINNING AND END OF SEASON
TASKS AT END OF SEASON
 Carefully empty the condensed water tank into a suitable container as described in
the section on “emptying the water tank”.
 Let the air conditioning unit run for 2 hours in the blower/fan mode until the device is
completely dry inside.
 Switch the device off and pull the power plug.

Clean the filter and re-insert it after drying it (see section on “cleaning the air filter”).
 Remove the air hose and the accessories and store them carefully.
 Remove the batteries from the remote control.
 Pack the device and store it at a cool and dry place.
CHECKS AT BEGINNING OF SEASON
 Make sure the power supply cable and the outlet are fault free and that it is properly
grounded.
 Make sure the plug is properly fitted to the condensation outlet and that the filters
have been inserted.
 Observe the installation and safety instructions precisely.
FOR
DEHUMIDIFIER-
MODE
Permanenter
Wasserauslass
für Kühlmodus
FOR COOLING
MODE