Be Cool BC18KL2101F Скачать руководство пользователя страница 21

Seite 21 von 40

PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE STARTING

ASSEMBLY, INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF

AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO COMPLY

WITH INSTRUCTIONS COULD RESULT IN PERSONS AND / OR PROPERTY DAMAGES

AND / OR LOSS OF THE WARRANTY CLAIM!

IMPORTANT

INFORMATION

ON

SAFETY,

LOCATION AND ELECTRICAL CONNECTION.

1.

Read all instructions carefully before using the device.

2.

Use this device only in accordance with the instructions in the manual. Any other use not recommended by

the manufacturer could result in fire, electric shock, or personal injury.

3.

This device is intended for cooling in households and may not be used for any other purpose.

4.

The device is not suitable for continuous and precision operation and should not be used for cooling

electrical systems (e.g: in server rooms).

5.

It is forbidden to modify the characteristics of this device in any way and only use replacement parts and

accessories recommended by the manufacturer (failure to do so will void the warranty).

6.

For any repairs to the device, power plug or cable, always and exclusively contact authorized service

centers. The customer service centers can be accessed online at www.becool.at.

7.

Remove the packaging and make sure the air conditioner is not damaged. If in doubt, do not use the air

conditioner and contact the service center or your seller.

8.

Keep children away from packaging material. If swallowed there is danger of suffocation!

9.

If the power cord is damaged, it must be replaced by the manufacturer or an authorized service center to

avoid all possible risks.

10. The device must be installed in accordance with local electrical system installation and operating instructions.

11. The electrical socket in which you connect the device must not be defective or loose and must be suitable

for the required current load and above all be reliably earthed. If in doubt, have your electrical installation

checked by a qualified electrician.

12. Before connecting to the device to the electrical socket, you must check whether the type of current and the

mains voltage comply with the information given on the back of the device.

13. Avoid using an extension cord as it could overheat and cause a fire.

14. Do not twist or bend the power cord.

15. This device may only be used by adults.

16. Children under the age of 8 and persons with limited physical, mental, sensory or mental abilities, and lack

of experience and knowledge may only use this device if it is under appropriate supervision and provide

detailed instructions for use of the device in a safe manner and how the existing dangers have been

described.

17. Do not let children play with the packaging and make sure that children do not play with the device.

18. Do not use the air conditioner outdoors.

19. Do not use the device with wet hands.

20. Never operate the device in areas where gas, oil or sulfur are present.

21. Do not place the device near sources of heat (e.g.: near heating systems and gas heaters) and avoid direct

sunlight.

22. Keep a minimum distance of at least 50cm to combustible materials (e.g., alcohol, etc.) or pressurized

vessels (e.g., spray containers).

23. Do not use the air conditioner near water or high humidity, e.g.: in the wet basement, next to swimming pool,

bath or shower. Make sure that no water gets into the device.

24. Do not place heavy or hot objects on the unit and never cover the unit.

25. Never insert fingers, pins or other objects into the unit, being careful not to block the air inlet and outlet.

26. Always turn off the power before unplugging the power cord.

27. Do not pull the power cord to disconnect the device from the mains. Always pull on the plug to pull out the

power cord. Do not handle the plug with wet hands to avoid electric shock.

28. Unplug the device when not in use before cleaning, servicing or moving it from one location to another.

29. If the device has a defect, switch it off with the on / off button on the control panel and contact the customer

hotline.

30. Maintain the air conditioner in good condition by caring for and cleaning the unit.

31. The air filter should be cleaned at least once a week.

32. Store the device vertically in a safe place, dry and out of the reach of children, when not in use. Do not cover

the device with plastic packaging.

33. Store the unit in a room with no ignition sources in operation (e.g.: open fire, service gas appliance or

electric heater with open heat source).

Содержание BC18KL2101F









































Отзывы: