34
5.
6.
Keeping the finger flexed, use needle point
pliers to insert the pivot pin through both
parts of the link.
Note:
The pin is tapered and can be
inserted & removed from one side only.
Using a pair of standard pliers ensure that
the pivot pin sits flush with the surface on
both sides of the leadscrew.
7.
8.
Ensure that the finger flexes fully forward
and springs back to the upright position as shown
in the two images above.
Finished.
3.
4.
Using a spare clevis link assembly from the tool
kit. Place it into the slot in the proximal. Ensure
that the curve of the clevis link curves away from
the finger towards the palm.
Bend finger forward to align the holes for the
pivot pin.
Any repairs/adjustments other than those
shown here would need to be carried out by an
approved Steeper repairer.
WARNING
