17
A bebionic system is very versatile and allows a number of different power and connectivity options.
Most options are detailed in the following section of this document. However if you have a question regarding a
specific build not outlined in this document please contact your local supplier.
The bebionic hand may also be used with other manufacturers’ electrodes and wrists. This means the bebionic
small hand can be fitted into an existing system without having to change every single component.
4.0 Connections and Compatability
4.1 Wrist Options
Thee are currently three wrist options for the bebionic small hand.
Electric Quick
Disconnect (EQD)
Short Wrist
Allows the hand to be removed
with a rotating action. The EQD
wrist allows the patient to quickly
rotate and remove or attach
terminal devices as required.
Low profile connector for
applications where there is a
long residual limb. A short wrist
lamination assembly is supplied
attached to these hands. The hand
can be rotated against a constant
friction, which can be adjusted by
the patient.
Flexion Wrist
The Flexion Wrist from Motion
Control is a simple flexion device
that allows the wearer to easily
lock or unlock the wrist position
and reposition the wrist in either a
flexion or extension position. The
mechanism allows the wrist to be
flexed or extended to 30 degrees
in either direction and locked in
each of the three positions.
4.2 Battery Options
BBI=1300S
Typical Capacity: 1300mAh
Voltage (Nominal): 7.4V
Size: 8.6 x 36.5 x 66.5 mm (x2)
(
3
⁄
4
” x 1
3
⁄
8
” x 2
5
⁄
8
”)
BBI=2200S
Supplied with a removable shrink
fit coating, allowing the cells to be
split for easier fitting in the prosthesis.
Typical Capacity: 2200mAh
Voltage (Nominal): 7.4V
Size: 18.5 x 36.5 x 70 mm
(
3
⁄
4
” x
3
⁄
4
” x 2
3
⁄
4
”)
or 18.5 x 18.5 x 70 mm (x2 when split)
(
3
⁄
4
” x 1
3
⁄
8
” x 2
3
⁄
4
”)
Only the following battery options should be used with the bebionic
small. Use of other battery systems is not recommended.
WARNING
