2
USER MANUAL
OPERATING INSTRUCTIONS
1.
3.
2.
4.
14 OZ. GREASE GUN LOADING
1. Pull plunger back & lock in place. This helps seal the unit to
prevent leakage and contamination.
2. Remove grease gun head, remove plastic cap from
cartridge, and insert face down into gun.
3. With cartridge inserted, removed pull tab / flip top from
exposed end of cartridge, and replace the grease gun head.
4. Release the plunger lock, and pump lever handle several
times to prime grease gun.
**Air bleeder valves help remove air pockets from inside of
cartridge, and assist in priming the gun easier.
SUCTION FILLING
1. Remove grease gun head, and submerge the open end into
the bucket of grease.
2. Hold the gun firmly and securely, and slowly draw the
plunger back to fill the gun.
3. Watch for the groove in the plunger rod to indicate the gun
is full, and then lock the plunger rod in place.
4. Replace the grease gun head back onto the gun and release
the plunger lock.
**Always keep the open end of the barrel submerged while
drawing on the plunger to ensure no air gets sucked into the
