bdiusa.com
VENUE
8649 G/W
MEDIA CONSOLE
6
Fine tuning your new BDI Venue Home Theater Furniture
These steps are to be followed after you have unpacked and completed the simple assembly instructions for
your AV cabinet. Due to jostling in freight or perhaps an uneven floor, the doors on your cabinet may not appear
to be in perfect alignment. Making a few minor adjustments can rectify this situation. The high-quality European
hinge hardware is adjustable. Through a little adjustment, you can modify the orientation of the cabinet doors to
make sure that they are sitting perfectly on your unit.
STEP 1 - Level your unit
Levelers are integrated into each leg assembly and are accessed at the bottom of each cabinet leg. If your floor
is uneven, you may extend one or more levelers to attain a level, stable cabinet placement. Turning the leveler
clockwise will extend the leveler; turning it counter-clockwise will retract it.
STEP 2 - Adjust Door Hinges (if needed)
The doors on your cabinet should be evenly spaced and the doors should open and close freely without rubbing
against the door frame. If the cabinet’s doors appear out of alignment, this condition can be corrected with minor
adjustment to the European hinges on each door. Because these hinges are adjustable, adjusting one hinge
element can sometimes cause the need for adjustments to other elements. But with a few adjustments, you can
modify the orientation of the cabinet doors to make sure that they hang perfectly within your cabinet.
Use the
Phillips Screwdriver T1
supplied to adjust the door hinges:
•
By adjusting
Screw 1
, the door will move LEFT or RIGHT within the frame.
Make minor adjustments at both top and bottom hinges for best results.
•
By adjusting
Screw 2
the entire door will move IN or OUT, opening or
closing the gap between the door frame and cabinet. (This screw rarely
needs adjustment.)
2
1
1
2
Example of a tight seam.
Top hinge on Door C
must be moved to the
left.
Example of an open seam.
Bottom hinge of Door C
must be moved to the right.
Tighten this screw to
move door away from
the adjacent door.
Loosen this screw to
move door towards
the adjacent door.
Door C
