bdiusa.com
VENUE
8649 G/W
MEDIA CONSOLE
4
Step 7 - Wire Management
With help from another person, carefully rotate Venue onto its feet.
The 2
Back Panels C5
are removable. To
remove lift up and pull the bottom edge out of its groove. To re-install, put the top edge of the back panel into
the top groove, then drop the bottom edge into the bottom groove.
Venue Media Console comes with
2
KLEET
Cord Wraps H3
. Remove the adhesive backing and adhere the
Cord Wraps
onto the back of the leg as shown (or on the bottom of the cabinet if preferred). Velcro straps are
included under the top panel for your convenience to facilitate wire management.
2 Person Task
2
1
C5
C5
H3
Cord Wrap
Velcro Straps
Step 6 -
With help from another person, carefully lay the
Cabinet A1
on its top (upside down).
Attach the
base assembly to the bottom of the
Cabinet A1
with
8 Screws H1
as shown using
Hex Wrench T2.
Once all
screws have been started, fully tighten all base screws.
2 Person Task
H1 1/4-20
Screw
x 8
T2
A1
