BDI MÜV 1252 Скачать руководство пользователя страница 3

Страница: 3 / 5

bdiusa.com

MÜV

1252

Table

Step 4 -

Place

hex driver T1

into the access holes at a 45 degree angle and tighten the connectors by turning

clockwise

about 1/4 turn until tight. You may need to

wiggle the hex driver

until the end of the driver engag-

es with the connecting hardware. Tighten all 4 connectors.

Step 5 -

Orient the

bottom panel C3

as shown and slide it so that the aluminum channel goes into the slot on

bottom panel C3

. Keep sliding until the mitered edges align and touch.

Wiggle and lift bottom panel C3

align the joint and close the seam.

4 access holes

to tighten connectors

Middle Panel

Hex Driver

Bottom Panel

Aluminum Channel

Содержание MÜV 1252

Страница 2: ...rom glass panel A1 Slide one edge of glass panel A1 with aluminum rail into the matching slot on bottom side of top panel C1 If the aluminum channel is tight brace the front edge of the top panel Step 3 Take the middle panel C2 and position it as shown until the connectors engage with each other Make sure the edges are flush C1 Top Panel A1 Glass Panel Finger Groove Wall ...

Страница 4: ...ing caster H2 with pan head screws H1 and a Phillips screwdriver Repeat for all 4 casters H1 x 16 H1 x 4 H2 Phillips Driver not included Step 6 Tighten the 4 miter joint connectors by inserting hex driver T1 into the slanted holes and turning clockwise until tight T1 Hex Driver 45 angle ...

Страница 5: ...on carefully position the tables onto their wheels Step 10 Your Müv Coffee Table comes with lockable casters Raise the tab to lock lower the tab to unlock Caution The middle panels have hidden magnets to help align the 2 halves of your Müv table Keep sensitive electronic equipment and fingers out of the path of the magnets Hidden Magnets Lockable Casters ...