BDI MÜV 1252 Скачать руководство пользователя страница 2

Страница: 2 / 5

bdiusa.com

MÜV

1252

Table

Step 2 -

Place the

top panel C1

(which has a finger groove around the bottom edge as shown).

Remove the

protective film from

glass panel A1.

Slide one edge of

glass panel A1 (with aluminum rail)

into the matching

slot on bottom side of

top panel C1.

If the aluminum channel is tight, brace the front edge of the top panel.

Step 3 -

Take the

middle panel C2

and position it as shown until the connectors engage with each other.

Make sure the edges are flush.

Top Panel

Glass Panel

Finger Groove

Wall

Содержание MÜV 1252

Страница 2: ...rom glass panel A1 Slide one edge of glass panel A1 with aluminum rail into the matching slot on bottom side of top panel C1 If the aluminum channel is tight brace the front edge of the top panel Step 3 Take the middle panel C2 and position it as shown until the connectors engage with each other Make sure the edges are flush C1 Top Panel A1 Glass Panel Finger Groove Wall ...

Страница 4: ...ing caster H2 with pan head screws H1 and a Phillips screwdriver Repeat for all 4 casters H1 x 16 H1 x 4 H2 Phillips Driver not included Step 6 Tighten the 4 miter joint connectors by inserting hex driver T1 into the slanted holes and turning clockwise until tight T1 Hex Driver 45 angle ...

Страница 5: ...on carefully position the tables onto their wheels Step 10 Your Müv Coffee Table comes with lockable casters Raise the tab to lock lower the tab to unlock Caution The middle panels have hidden magnets to help align the 2 halves of your Müv table Keep sensitive electronic equipment and fingers out of the path of the magnets Hidden Magnets Lockable Casters ...