Step 1
Installing the arms.
Bracket mounting holes should face inward.
A
G
Step 2
Install Levelers x 6
Adjust levelers so base is level and stable.
Install frame onto base.
Use shown hardware to attach base to frame.
x 2
I
H
J
x 6
F
D
Страница 1: ...Assembly should be done on a clean non marring surface All tools necessary are provided Icon is designed for indoor use on level surfaces Clean glass parts with glass cleaner clean steel and wood parts with a moist cloth If any parts are damaged or missing please contact BDI at customerservice bdiusa com Designed by Cristian Wicha Bill Becker Shelf brackets x 2 Glass shelves x 2 Component list Fro...
Страница 2: ... arms Bracket mounting holes should face inward A G Step 2 Install Levelers x 6 Adjust levelers so base is level and stable Install frame onto base Use shown hardware to attach base to frame x 2 I G x 2 H J x 2 x 6 F D x 2 ...
Страница 3: ...itions Step 4 Installing Back panel Back panel is to be installed with small holes facing backward Wire management straps Velcro straps are supplied to control cables They can be screwed into the steel at top and bottom of the arm or into the small holes on the back panel K L H x 4 E H x 2 brackets E E ...
Страница 4: ...lation Note Leave screws loose until all screws have been installed Then tighten securely It may be necessary to loosen shelf brackets to obtain proper fit Once fitted tighten securely Shelf Glass Shelf Glass Bottom Use 2 x A Use 2 x C Use 2 x B Use 2 x C Becker Designed Inc 14101 A Parke Long Ct Chantilly VA 20151 www bdiusa com Use 4 x C Top Glass Use 2 x A Use 2 x B ...
