CIRRUS
8158
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM [email protected]
Optional Step
Adjust Height of Doors
In case door is not aligned properly, fixed wheel rollers on the bottom
of each door are height-adjustable. Loosen two (2) inner screws using
Phillips Screwdriver (A)
, raise or lower wheel cartridge slightly,
then re-tighten screws.
Step 6
Install Sliding Doors
With cabinet remaining upside down on a carpeted floor, install
Sliding Doors (O)
by inserting top edge of door (with brass plate)
into upper track, pushing downward, then tipping bottom edge into
lower track.
NOTE:
Brass Plates on top of doors align with Ball
Catches at sides of cabinet.
Upper Track
Cabinet upside down
on carpeted floor to
protect finish.
Lower Track
Brass
Plate
on Top
of Door
Ball Catch in Top of Cabinet
Upper Track
Top Edge of Door
Ball Catch in Top of Cabinet
Top Edge
with Brass Plate
and Spring-Loaded
Wheels
A
Brass Plate
on top edge
faces sides
of Cabinet
Sliding Door (O)
Top Edge
Bottom Edge
without Brass Plate
Sliding Door (O)
Back View
