CIRRUS
8158
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM [email protected]
Step 3
Attach Base Assembly
Attach Base Assembly to
Assembled
Cabinet (I)
with
Front Rail (H)
oriented
towards cabinet front (see drawing).
Fasten into place using
Washers (J)
and
Screws (K)
at
Front Rail (H)
and
Rear
Rail (G)
and tighten with
Hex Driver (B)
.
Step 5
Attach Center Wheel Block
Attach
Center Wheel Block (N
) to cabinet’s
bottom panel using
Screws (L)
and tighten
with
Hex Driver (B)
.
Rear Rail (G)
is painted Black
Cabinet upside down
on carpeted floor to
protect finish.
NOTE:
Levelers are present at
the front and rear
underside of each Leg
Assembly. Each Leveler is
manually adjustable by
hand-turning to extend or
retract to the desired position.
Such adjustment will help
offset uneven flooring
and/or will prevent the
cabinet from rolling.
Front Rail (H)
is wood veneered
Assembled Cabinet (I)
Front
K
J
M
M
Step 4
Install Screws into Leg Assembly
I
nstall
Screws (M)
into
Leg Assembly (F)
and tighten with
Hex Driver (B)
.
Center Wheel Block (N
)
Leveler towards front
Screws (L)
Cabinet upside down
on carpeted floor to
protect finish.
Leg Assembly (F)
Leg Assembly
(F)
Assembled Cabinet (I)
Front
