B -
4mm Hex Driver
A -
Phillips Screwdriver
E -
Cam Fastener
x 4
F-
Leg Assembly
x 2
I -
Assembled Cabinet
x 1
N -
Center Wheel Block
x 1
J -
Washer x 8
Q -
Adjustable
Center Shelf x 1
K -
1/4-20 x 55mm
Machine Screw x 8
M -
1/4-20 x 38mm
Machine Screw x 4
P -
Back Panel
x 2
R -
Adjustable Shelf
x 4
G -
Rear Rail x 1
H -
Front Rail x 1
C -
Dowel Pin x 8
D -
Cam Bolt x 4
O -
Sliding Door x 2
L -
1/4-20 x 90mm
Machine Screw x 2
CIRRUS
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2010 BDI
Made in China. 8158 Revision: 021210
Component List
8158
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Cirrus is engineered for easy assembly. Carefully follow this procedure to
prevent any damage.
Placement and Maintenance
Cirrus is designed for indoor use on level floors. Clean glass with glass
cleaner, and steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a
nonmarring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Step 2
Build Base Assembly
Install
Cam Bolts (D)
near front and rear edge of each
Leg Assembly (F)
using provided
Phillips Screwdriver (A)
. Next, insert
Dowel Pins (C)
into
holes at ends of
Front Rail (H)
and
Rear Rail (G)
. Then join both Rails
and Leg Assemblies together, aligning holes for all Cam Bolts and Dowel
Pins.
Once all Cam Bolts and Dowel Pins are fully inserted to the respective
holes, fasten together by inserting
Cam Fastener (E)
and turning about
one-half turn clockwise using
Phillips Screwdriver (A)
.
E
C
G
F
C
F
D
F
F
G
H
H
