2
Your Avion Noir
™
Home Theater Furniture is engineered for easy
assembly. Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Avion Noir
™
Home Theater Furniture is designed for indoor use on
level floors. Clean glass with glass cleaner. Clean steel parts and
wood veneer with a moist cloth.
G
- Nylon Screw x 8
Step 1
H
- Mounting Screw x 12
Step 2
C
- Metal Leg x 3
D
- Adjustable Shelf x 2
E
- Shelf Pin x 8
F
- Handle x 4
Adjustable shelf pins (E)
may be
repositioned depending on the height
of your component, allowing you to
raise or lower the adjustable shelf to the
desired level.
Install adjustable shelf (D)
inside
the left and right cabinet area.
NOTE: To place the adjustable shelf
inside the cabinet, the shelf must be
tilted sideways to clear the door.
Medium Hex Wrench x 1
B
- Sliding Back Panel x 2
Small Hex Wrench x 1
Velcro Strap x 5
D - Adjustable Shelf
Avion Noir
™
Home Theater Furniture
Designed by BDI Design Studio.
‘Avion Noir’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2006 Becker Designed, Inc.
A
- Avion Noir Cabinet x 1
Unpack and identify the parts listed above.
The assembly workspace should be a non-marring surface such as carpet.
For missing hardware pieces, please contact BDI Customer Service at:
[email protected]
All other concerns please contact your local BDI Retailer.
Install legs
.
Remove all internal components from the cabinet including shelves, and
hardware box.
Carefully lay cabinet (A)
updside down (Step 1).
Using the medium hex wrench, screw the metal leg
(C)
to the bottom of the
cabinet with mounting screw
(H)
. NOTE: Each of the metal legs have
adjustable levelers that can be adjusted from inside the cabinet using the small
hex wrench.
Speaker Drawer Panel x 1
E - Shelf Pin
Component List
NOTE: Hardware contents located inside top center drawer.
A
H
Gromet x 2
www.bdiusa.com
Phillips Screwdriver x 1
